bobbygasser216
Mahtomedi MN
Joined: 08/08/2006
View Profile
 Offline
|
please help I need some 40mm rack carbs. I efed up my piolits and now have an EZ out broke off in one of them I need some thing for to marrow because I got some guys comming out to practice.
bobbygasser
|
nickster
new richmond wi.
Joined: 08/08/2005
View Profile
Offline
|
That's going to be tough getting a set by tomorrow. I would try Lance Brenizer, or Tadd Frederic ( Turtle Lake Motorsports )
* This post was
edited 07/26/08 12:50pm by nickster *
|
mbenoy119
IWA World Headquarters
Joined: 01/17/2005
View Profile
Offline
|
Bobby, call me back, I can fix the ones you have but probably not by tomorrow. Monday for sure.
Mike
|
DM16
the mean streets
Joined: 08/09/2005
View Profile
Offline
|
Bobby I have a set for the right price?
|
bobbygasser216
Mahtomedi MN
Joined: 08/08/2006
View Profile
Offline
|
I talked to Mike and he's going to see if he can fix them. I got it to run pretty good for today I just richened up my needle all the way and that seemed to work pretty good and actualy Leanned it out one. I ran it on the stand at quarter throttle than shut it doun and the plugs looke good. Than toward the end of today I think a PTO bearing is starting to fail on me it died on me once on the watrer than I got it dried out and seamed fine than it died on me again but on land this time i checked it and it sounded like I could heare some metal ginding down there.
Are big bearing/big boy kits legal in stock class. I cant't see it being performance inhansing, just for longjivity reasons I would want to do it.
|
wardlake
Frederic, WI
Joined: 04/04/2008
View Profile
Offline
|
Exactly... Helps it live longer but no faster. And yes it is legal in stock.
Steve
|
skidooalltheway
Berlin, WI
Joined: 06/05/2006
View Profile
Offline
|
how would that be alright in stock class just asking
|
mbenoy119
IWA World Headquarters
Joined: 01/17/2005
View Profile
Offline
|
it's a wider PTO bearing, I can't see how it wouldn't be allowed as it requires no modification to the case. Should we be splitting crankcases in tech to find out if the crank bearings are the proper width?
|
skidooalltheway
Berlin, WI
Joined: 06/05/2006
View Profile
Offline
|
does it come stock on that machine
|
CHUB_CHUB
Ely, MN
Joined: 07/04/2008
View Profile
Offline
|
the big bearing does not come stock on the engine, it is a aftermarket upgrade for longer crank life to my knowledge. and i think if u started tearing cases apart in tech u might be there a while.
|
