waterxskidoo413
The Ghettos of Inver Grove
Joined: 07/12/2005
View Profile
 Offline
|
I can see where both sides are coming from here, no it's not "stock", but it is also has no gain apparently
but...
then some consideration should be taken about other "non stock" parts that are made by a manufacturer and are more convienient, but give no advantage to a racer.
413= philippians 4:13: I can do all things through CHRIST who strengthens me.
|
skidooalltheway
Berlin, WI
Joined: 06/05/2006
View Profile
Offline
|
I could not have put it any better my self
|
Doo-or-Dont
Ely, Mn
Joined: 02/12/2008
View Profile
Offline
|
What Andy is getting at Chubs is that it does not come stock on the motor and therefore is an aftermarket part and not allowed in the stock class. Performance enhancing or not.
|
nickster
new richmond wi.
Joined: 08/08/2005
View Profile
Offline
|
This is why this should be the last year of stock.
|
H2OX175
wisconsin
Joined: 03/07/2006
View Profile
Offline
|
I agree with Matt , mod 600 and mod 800 let the stock 800's and the 700's with pipes run in the mod 600 class .
|
CHUB_CHUB
Ely, MN
Joined: 07/04/2008
View Profile
Offline
|
i kno what andy is getting at kelly, i was just saying that it is and upgrade and not stock.
|
wardlake
Frederic, WI
Joined: 04/04/2008
View Profile
Offline
|
Chad what parts are you referring to? As for the only stock thing, a comparison would be anti rachet drives. It was a place where SkiDoo had it and no one else did so they made it legal for everyone. And we can not honestly say it did much but drained $150 plus a new track out of our budget.
Steve
|
waterxskidoo413
The Ghettos of Inver Grove
Joined: 07/12/2005
View Profile
Offline
|
Steve,
I don't mean any certain parts. I'm just wondering what is "stock"
This does open the can of worms about the "get rid of stock" movement, which I'm sure will be discussed at length again at this years board meeting. Personally, i don't have an issue with the bearings, if there is no foreseeable advantage.
Chad
|
bobbygasser216
Mahtomedi MN
Joined: 08/08/2006
View Profile
 Online
|
I'm all for the the 600 mod rule but with more discrepancies like mabye alowing a 600/440 based motor pumped up to a 660 or 685/700 max, no 670's being pumped up to 685/or what ever is do-able.
I'm not going to do the big bearing kit after all, it just dowsn't seem cost afective.
bobbygasser
|
bobbygasser216
Mahtomedi MN
Joined: 08/08/2006
View Profile
Online
|
ok lets start a new discussion on this 600 mod rule
|
